Based on reviews.

Big Sale on Selected Bodies! Go check Special Sale items!

-
Envío a más de 180 países
En línea desde 2010
Satisfacción 100% garantizada
HPI Racing -  Ford Mustang Mach-E 1400 1:10 RS4 Sport 3 FLUX RTR
  • HPI Racing -  Ford Mustang Mach-E 1400 1:10 RS4 Sport 3 FLUX RTR
  • HPI Racing - Ford Mustang Mach-E 1400 1:10 RS4 Sport 3 FLUX - RTR
  • HPI Racing - Ford Mustang Mach-E 1400 1:10 RS4 Sport 3 FLUX - RTR
  • HPI Racing - Ford Mustang Mach-E 1400 1:10 RS4 Sport 3 FLUX - RTR
  • HPI Racing - Ford Mustang Mach-E 1400 1:10 RS4 Sport 3 FLUX - RTR
  • HPI Racing - Ford Mustang Mach-E 1400 1:10 RS4 Sport 3 FLUX - RTR
  • HPI Racing - Ford Mustang Mach-E 1400 1:10 RS4 Sport 3 FLUX - RTR
  • HPI Racing - Ford Mustang Mach-E 1400 1:10 RS4 Sport 3 FLUX - RTR
  • HPI Racing - Ford Mustang Mach-E 1400 1:10 RS4 Sport 3 FLUX - RTR
  • HPI Racing - Ford Mustang Mach-E 1400 1:10 RS4 Sport 3 FLUX - RTR
  • HPI Racing - Ford Mustang Mach-E 1400 1:10 RS4 Sport 3 FLUX - RTR

HPI Racing - Ford Mustang Mach-E 1400 1:10 RS4 Sport 3 FLUX RTR HP160375

Precio
426,55 €
En Stock
Agotado temporalmente

¿El producto o modelo que está buscando está fuera de stock?

Si el producto o el modelo que está buscando está fuera de stock, suscríbase a la notificación de disponibilidad.

Código
HP160375
IVA
21%
En Stock
0 uds.
UPS Express Saver
52,40 €
Opción de envío express rápido. Entregado en 1-2 días hábiles con seguimiento y opciones de entrega flexibles.
GLS Euro Business Parcel
6,90 €
Envío económico estándar con seguimiento. Entrega en la mayoría de las veces en una semana.
UPS Access Point Standard
13,90 €
Envío estándar y confiable con seguimiento de UPS. Entregado en el punto de acceso que elija en unos días.
DHL Express
76,00 €
Opción de entrega confiable y rápida de DHL Express. Entrega normal en 1-3 días hábiles.
GLS Euro Business LQ Parcel - Spray
6,90 €
Opción de envío estándar para pinturas en aerosol a todo el continente europeo. Courier recoge estos envíos una vez a la semana todos los lunes, lo que significa que esta opción es siempre "entrega la próxima semana".
DHL Express Lipo battery
81,00 €
Esta es la opción más rápida para enviar baterías LiPo. El pedido debe incluir el componente electrónico del automóvil (servo, ESC o receptor) con la batería; de lo contrario, no se puede enviar el paquete.
Los mejores productos de RC
Opciones de envío urgente
Más del 90% de nuestros clientes nos han recomendado a sus amigos

Productos compatibles

HPI Racing -  Ford Mustang Mach-E 1400 1:10 RS4 Sport 3 FLUX RTR

HPI Racing - Ford Mustang Mach-E 1400 1:10 RS4 Sport 3 FLUX RTR

HP160375
426,55 €
Agotado temporalmente
Aficionado Avanzado
Velocidad máxima km/h
60-80
Batería y cargador
No incluida
Fuente de alimentación
NimH
Lipo 2S
Terreno adecuado
Onroad
método de dibujo
4WD
Protección del agua
Protegido

Awesome Brushless 1:10 Ford Mustang Mach-E 1400 prototype. No battery or charger incl.

ERC Recommendations:

  • Recommended for beginners
  • Suitable for paved surface
  • Protected from water
  • Top speed +120km/h possible! (with 3S battery and optional gearing)
  • Does not include battery or charger!

This Sport 3 FLUX features the amazing 4WD, all-electric Ford Mustang Mach-E with styling tuned and tweaked by the Fun-Haver himself, professional drifting champion Vaughn Gittin Jr., to become the awesome Ford Mustang Mach-E 1400 prototype, a test bed for advanced materials and technologies.

With SEVEN electric motors and super-high downforce levels, it's not just a research vehicle - it's also an all-out performer perfect for a variety of automotive tests, from the drag strip, drift course and race track! 

The full-size version took over 10,000 hours of development work between Ford Performance and RTR to make sure it bridges the gap between what an electric vehicle can do and what customers tend to believe it can do.

Under the hood, the 1/10th scale version Ford Mustang Mach-E 1400 is equipped with the latest HPI Racing Touring Car chassis, the Sport 3 FLUX! With a full-time shaft drive, fully sealed 4WD drivetrain, brushless motor and waterproof electronics and 2.4GHz radio gear, fully independent double wishbone suspension and adjustable oil filled shocks it’s Ready to Rock in any condition - and HPI FLUX power means it's got plenty of power for 4-wheel drifts and jaw-dropping speeds at the pull of a trigger!

The officially licensed, super realistic Ford Mustang Mach-E 1400 replica features a custom Ford Performance livery to match the car's one-off status, plus molded plastic dive planes, rear wing, side mirrors and diffuser to finish off the custom look!

DESIGNED WITH RTR AND THE FUN-HAVER HIMSELF!

The Mach-E 1400 was a collaboration between Ford and RTR, the design house of World Champion pro drifter and Ford Mustang icon, Vaughn Gittin Jr! It's a spectacular mix of classic Mustang design and high-end motorsport performance that any car enthusiast will appreciate. Vaughn has been customizing Mustangs for years using his own RTR options, available from select Ford dealerships around the world.

One Piece Molded Chassis

The main chassis is formed from a single piece of reinforced plastic and features the drivetrain tunnel molded right down the middle, just like a real car. It's a step beyond any plastic tub chassis car available today.

HPI FLUX TECHNOLOGY FOR ULTRA-FAST SPEEDS

What sets apart the Sport 3 FLUX from our other offerings is the HPI Flux brushless power installed in every Flux-powered machine. The Sport 3 FLUX is fitted with the awesome FLUX MMH-4000 motor, one of our most powerful motors for 1/10th scale cars. Thanks to the robust FLUX EMH-3S speed controller, you can strap in your choice of 2S or 3S LiPo power (or a 7.2v-8.4v NiMH battery with a suitable T-plug) to give the car an unbelievable power out of the turns and speeds of up to 70mph (124km/h) on the straight, when using optional gearing!

*To achieve 70mph you will need the 114569 - HIGH SPEED GEAR SET and 160162 - PLAZMA 11.1V 3200mAh 35C LiPo Battery Pack

Low Profile Layout Design

One of the ways we gave the RS4 Sport 3 the best possible handling was to make sure all the components fit as low as possible in the chassis. This gives the car an amazingly low center of gravity for optimum cornering capabilities.

RTR TECH 7 WHEELS

The RTR Tech 7 wheel combines the classic mesh wheel design with a modern, angular look that is both aggressive and functional, yet drenched with muscle car style. For full-size muscle car fans, this wheel is available ONLY for the Ford Mustang in a 20-inch size, however just for you they are perfectly replicated in 1/10th scale on this officially authorized scale replica Ford Mustang Mach-E 1400!

HPI SPEC-GRIP TIRES

Each wheel is wrapped in HPI's tried and tested 26mm SPEC-GRIP rubber tires, complete with multi condition tread and high traction rubber "K" compound for maximum grip on just about every paved surface. You'll get great acceleration, braking and cornering performance from these semi-slick, grippy rubber tires! The tires are molded in a durable, long-wearing rubber compound that will give you a long life for hours of fun and enjoyment.

Full-Time Four-Wheel Drive

The Sport 3 features full-time four-wheel drive to give you the most control and precision on the road or track. All four wheels are driven by heavy duty gear differentials at the front and rear, just like a real car. The extra traction gives you increased acceleration and cornering control for maximum confidence and fun.

Sealed Shaft Drivetrain

The drivetrain of all the RS4 Sport 3 models features the motor mounted longitudinally in the molded chassis, next to the long driveshaft that goes down the center of the car. The entire drivetrain, including the central driveshaft and gear diffs, is completely sealed to prevent dirt, rocks and debris from damaging or binding the drivetrain. The driveshaft, diffs and axles spin on ball bearings to maximize drivetrain efficiency.

Bottom-access Driveshaft

The central driveshaft that connects the front and rear differentials is easily accessed from underneath the chassis. This allows the drivetrain to be completely sealed to protect it from rocks and debris no matter where you may want to drive your car.

Easy Access Differentials

Getting to the differentials for quick adjustments is a matter of removing just 4 screws - this allows you to pop out the diff and change the grease, check the gears or just give it a general service.

4-Gear Metal Diffs

Bevel gear differentials at each end of the car transfer power from the driveshaft to the dogbones and axles that drive each wheel. The all-metal construction allows the drivetrain to withstand powerful brushless motors for easy upgrading in the future. Rubber-sealed ball bearings support the differentials and each diff can be tuned independently by changing the diff grease.

Double-wishbone Fully Adjustable Suspension

The suspension of the Sport 3 uses the race-proven double-wishbone suspension design, similar to a full scale modern race car. You’ll be able to control the anti-squat and anti-dive of the front and rear arms using the standard pivot blocks, and the option parts allow you to adjust the sweep and toe angles. You'll also be able to easily change the roll center front and rear with the racing-style vertical ballstud mounting on both the inner and outer camber link mounts. Multiple shock mounting positions provide a full range of shock suspension angle adjustment to suit different road conditions.

Oil-Filled Threaded Shocks

The Sport 3 is fitted with a set composite coilover-style oil-filled shocks, just like what you'd see on a real race car. The fully adjustable shocks are fully tunable to provide the optimum chassis performance on a wide variety of road surfaces. The ride height is quickly adjustable by using the threaded shock collars. Further tuning adjustments are also possible by changing the springs and shock oil weight.

Tough Front End Suspension

The Sport front end uses the strong C-hub style suspension seen on the latest RC touring cars, with a vertical ball stud camber mount that lets you change the front end roll center – which is a critical racing adjustment that allows the Sport 3 to be a step above other sport-level RC touring cars. The suspension arm also features multiple shock mounting holes for easy shock angle adjustment.

Tunable Rear Suspension

The rear hub is fitted with a vertical ball stud style adjustment that allows easy adjustment of the rear roll center. Moving the ball stud up or down with the optional spacers changes the traction characteristics of the rear end as the car goes through the turns. The suspension arm also features 3 different shock mounting holes for easy shock angle adjustment.

Double Bellcrank Steering

The performance tested adjustable double bell crank system provides optimum steering precision at all speeds. A metal drag link plate connects the cranks for extra durability, the additional drag link mounting positions also allows for Ackermann angle adjustments.

Rugged Spring-Loaded Servo Saver

The RS4 Sport 3 includes an adjustable multipiece cam-style servo saver, which protects the servo from crash damage. In the event of a crash or collision, the front wheels usually take a big portion of the blow and transmits the impact directly to the steering servo. The strong spring-loaded cam action of the servo saver is designed to absorb this force and protect the servo gears from the impact!


Aluminum Motor Mount

The cast aluminum cam-style motor mount holds the motor in place for a secure pinion/spur connection. Two screws hold the cam firmly in position on the mount, and cooling fins on the lateral support aid heat dissipation to keep the motor running as efficiently as possible.

Metal-Shielded Ball Bearings

The RS4 Sport 3 is fully fitted with a set of metal-shielded ball bearings for maximum efficiency. The metal shields keep the dust away from the internals while the smooth precision bearings provides for optimum power delivery from the power source out into the driveline.

ALL-NEW RADIO GEAR

Like all HPI cars, the Sport 3 is easy to drive with the included steering wheel controller. The All-New 2.4Ghz FHSS TF-50 Transmitter features:

  • Drop down steering position for a natural control position
  • Foam covered wheel for extra comfort and grip
  • Swappable steering wheel design for left handers!
  • Rubber finger and thumb handle grips
  • Rubber bumpers on all corners for the highest protection.
  • Magnetic area on the base for body clips or screws while you work!
  • Digital on and off switch
  • Audible warnings if you leave the TF-50 switched on, and if the batteries are low on power!
  • Servo Reverse, EPA, Trims and Dual Rate switches.

The NEW RF-50 receiver features a waterproof silicone inner jacket for use in any weather and a built-in failsafe - Signal on the RF-50 for the FLUX cars and signal and battery life for the RF-50N on the Nitro!



Features:

  • Replica Ford Mustang Mach-E 1400 Vaughn Gittin Jr.
  • RS4 SPORT 3 chassis design
  • Factory-assembled Ready-To-Run: just plug in and drive
  • Fully enclosed 4WD shaft drive
  • Low profile layout design = low CG for enhanced cornering capabilities and overall superior handling
  • Brushless FLUX MMH-4000 motor
  • Encased pinion & spur gear
  • Sealed metal gear diffs capable of handling brushless power
  • Brushless HPI FLUX EMH-3S Waterproof ESC (2S - 3S LiPO battery or a 7.2v-8.4v NiMH battery with a suitable T-plug)
  • NEW! HPI TF-50 2.4GHz Radio Set with waterproof receiver
  • Thick hook-and-loop strap holds battery in place
  • Enclosed receiver case protects from the elements
  • Double-wishbone suspension design
  • Composite oil-filled threaded shock absorbers
  • Complete set of ball bearings
  • Option parts available include: carbon fiber shock towers, universal dogbones, aluminum shocks and more

Specifications:

  • Length: 431mm (17")
  • Height: 127mm (5")
  • Width: 200mm (7.9")
  • Wheelbase: 254mm (10") 
  • Includes: 4 AA batteries

Needed to Complete

  • 2S or 3S LiPo pack with T-plug (Batteries here)
  • Battery charger (Find Chargers here)
  • LiPO Safety Bag

    El producto pertenece a estas categorías

    Los clientes que adquirieron este producto también compraron...

    HPI Racing -  Ford Mustang Mach-E 1400 1:10 RS4 Sport 3 FLUX RTR

    HPI Racing - Ford Mustang Mach-E 1400 1:10 RS4 Sport 3 FLUX RTR

    HP160375
    426,55 €
    Agotado temporalmente

    Otros vieron también estos productos

    HPI Racing -  Ford Mustang Mach-E 1400 1:10 RS4 Sport 3 FLUX RTR

    HPI Racing - Ford Mustang Mach-E 1400 1:10 RS4 Sport 3 FLUX RTR

    HP160375
    426,55 €
    Agotado temporalmente
    HPI Racing -  Ford Mustang Mach-E 1400 1:10 RS4 Sport 3 FLUX RTR
    426,55 €

    Nuestras principales marcas de RC

    Su carro de compra está vacío

    Términos y condiciones

    Idioma

    Divisa

    Mi cuenta

    Servicio de atención al cliente

    Información